Getting a new asphalt pavement installed is a complex and challenging project. Likely, you will only invest in this once or twice in your life. That’s why maintaining your asphalt pavement after installation is essential.

 

Asphalt is one of the most reliable materials on the market. It does not deteriorate quickly, but neglecting it for a long time and failing to care for your surface correctly can lead to problems. As a home or business owner, you want to maintain your new pavement’s attractive appearance for as long as possible.

 

Let’s take a look at some dos and don’ts that you should follow after asphalt paving installation.

 

Dos After Asphalt Paving Installation

 

Do the following after your asphalt pavement is installed:

 

Wait for Some Time Before Using It

 

Fresh asphalt is more vulnerable to damage. That’s why you need to give your asphalt time to cure. Wait at least one day before driving on the new surface because freshly installed pavement can be weak initially. During hot weather, you should wait even longer. Monitor the amount of weight that’s placed on your asphalt for at least 24 hours.

 

Drive Slowly on Freshly Installed Pavement

 

Driving fastly on the asphalt can be dangerous. Not only will it prevent your material from strengthening and drying, but it can also damage your vehicle. Operating at a slower speed can help you avoid dings, dents, and scuff marks on your car.

 

Keep the Asphalt Clean

 

Once your new asphalt project is complete, you should keep it as clean as possible. If there are fluid spills, such as oil, you should immediately clean them up. Failing to do so can cause fluids to seep down into the material and cause damage. Since oil spills break down the asphalt and weaken the surfaces, it’s vital to act fast. Be vigilant in cleaning your pavement as soon as you spot any issues if you want to extend the life of your investment.

 

Seal Coating the Pavement

 

Seal coating protects your asphalt from extreme weather conditions and harsh temperatures. It also helps protect your asphalt against water damage. Seal coating your asphalt pavement after installation is an important measure to take. Seal coating should be done every 2-5 years to extend the life of your investment, and further protect your asphalt.

 

Don’ts After Asphalt Installation

 

Don’t do the following after your asphalt is installed:

 

Do Not Drive on the Edges

 

Edges are the weakest points of your pavement. They are more susceptible to damage than any other points. If you drive on the edges, it can put extra weight on them. This will ultimately cause cracks. Avoiding putting pressure on the edges of your pavement is the most important preventive measure after asphalt paving installation.

 

Do Not Neglect the Cracks

 

If you notice any cracks in the pavement, you must take action as soon as possible because small cracks can lead to severe damage when ignored.

 

Don’t Park Vehicles in the Same Spot

 

Try not to park the vehicles in the same spot every day. It will weaken the pavement over that area and cause damage. It will also cause low spots in the asphalt.

 

Contact Pro Asphalt Company for Your Next Asphalt Paving Project

 

If you need a reliable Perris asphalt company, Pro Asphalt Company is here to help. Contact us today to schedule your appointment.